Introduction of Laser Cladding Alloy Powder: With the significant advances made in laser technology, laser cladding has gained increasing acceptance.
Compared to the traditional overlaying processes, it has the advantage of low distortion, low dilution, near net shape after cladding, and fine
Laser Cladding Alloy Powder | ||||||||||||
Powder | HRC | Chemical Composition | Mesh | Coating Process | ||||||||
C | Cr | Si | Fe | Mo | Ni | Mn | B | Other | ||||
Fe1 | 35-40 | 0.15 | 22.00 | 4.50 | Bal | 2.00 | 13.00 | 1.60 | 100/270 | PTA Overlaying, Laser Cladding | ||
Fe2 | 38-44 | 0.15 | 22.00 | 4.50 | Bal | 2.00 | 10.00 | 1.80 | 100/270 | PTA Overlaying, Laser Cladding | ||
Fe5 | 62-67 | 4.00 | 40.00 | 1.50 | Bal | 0.97 | 100/270 | PTA Overlaying, Laser Cladding | ||||
Fe90 | 50-55 | 0.15 | 13.50 | 1.30 | Bal | 1.60 | 100/270 | PTA Overlaying, Laser Cladding | ||||
Fe6 | 58-60 | 0.80 | 7.50 | 2.00 | Bal | 32.00 | 4.00 | 100/270 | PTA Overlaying, Laser Cladding | |||
Fe45 | 40-46 | 0.60 | 7.50 | 2.00 | Bal | 22.00 | 3.00 | 100/270 | OXY Spraying, PTA Overlaying | |||
Fe55HIP | 52-56 | 1.30 | 17.00 | 4.00 | Bal | 3.00 | 16.50 | 1.00 | W:3.50 | -100 | OXY Spraying, PTA Overlaying | |
Fe304 | 0.03 | 18.00 | 0.10 | Bal | – | 10.00 | 0.30 | – | 100/270 | PTA Overlaying, Laser Cladding, High Velocity Oxyfuel Spraying | ||
Fe304ฺ | 30 | 0.01 | 18.00 | 1.00 | Bal | 10.00 | 1.50 | 100/270 | PTA Overlaying, Laser Cladding, High Velocity Oxyfuel Spraying | |||
Fe313 | 0.50 | 15.00 | 1.00 | Bal | 0.90 | 0.40 | 1.50 | 150/325 | PTA Overlaying, Laser Cladding, High Velocity Oxyfuel Spraying | |||
Fe316L | 38-42 | 0.03 | 17.00 | 0.20 | Bal | 2.50 | 12.00 | 0.50 | – | 100/270 | PTA Overlaying, Laser Cladding, High Velocity Oxyfuel Spraying | |
Fe410L | 220 | 0.03 | 12.50 | 0.50 | Bal | – | – | 0.10 | – | 100/270 | PTA Overlaying, Laser Cladding, High Velocity Oxyfuel Spraying | |
JG-1 | 19 | 0.03 | 17.00 | 0.80 | Bal | – | – | 0.30 | 1.30 | 100/270 | Laser Cladding | |
JG-2 | 26 | 0.04 | 17.00 | 0.30 | Bal | – | – | 0.20 | 2.60 | 100/270 | Laser Cladding | |
JG-3 | 46 | 0.12 | 16.50 | 0.80 | Bal | – | – | 0.90 | 150/300 | Laser Cladding | ||
JG-4 | 63 | 1.00 | 4.00 | 0.30 | Bal | 5.00 | – | 0.30 | – | 100/270 | Laser Cladding | |
JG-5 | 52 | 0.26 | 14.00 | 1.40 | Bal | 0.50 | 2.50 | 0.50 | 100/270 | Laser Cladding | ||
JG-6 | 32 | 0.10 | 17.00 | 1.00 | Bal | 1.20 | 6.00 | 0.40 | 100/270 | Laser Cladding | ||
Powder | HRC | Chemical Composition | Mesh | Coating Process | ||||||||
C | Cr | Si | Fe | Mo | Ni | Mn | B | Other | ||||
Fe253 | 35 | 1.75 | 26.00 | 1.30 | Bal | 4.50 | 16.00 | 0.80 | – | 53/20 um | PTA Overlaying | |
Fe253H | 40 | 2.10 | 28.00 | 1.20 | Bal | 5.50 | 11.50 | 1.00 | – | 53/20 um | PTA Overlaying | |
Fe101 | 62 | 3.30 | 2.00 | 1.00 | Bal | 5.00 | 1.00 | 1.40 | 20/300 | Centrifugal casting on cylinder ID surface | ||
Fe102 | 62 | 2.70 | 2.80 | 1.00 | Bal | 5.50 | 1.00 | 1.90 | 20/300 | Centrifugal casting on cylinder ID surface | ||
Fe103 | 62 | 1.50 | 4.50 | 1.00 | Bal | 7.00 | 1.00 | 2.90 | 20/300 | Centrifugal casting on cylinder ID surface | ||
Fe103-5 | 63 | 1.50 | 6.00 | 2.00 | Bal | 8.00 | 1.50 | 3.00 | 10/300 | Centrifugal casting on cylinder ID surface | ||
Fe103-5A | 62 | 2.00 | 10.00 | 2.00 | Bal | 1.10 | 7.50 | 1.20 | 3.00 | 10/200 | Centrifugal casting on cylinder ID surface | |
Fe103WM | 61 | 1.50 | 7.20 | 2.30 | Bal | 2.50 | 10.00 | 0.60 | 3.00 | W:1.20 | 10/200 | Centrifugal casting on cylinder ID surface |
Fe104 | 60 | 1.70 | 4.50 | 1.50 | Bal | 11.00 | 0.80 | 3.00 | 20/300 | Centrifugal casting on cylinder ID surface | ||
Fe105 | 62 | 1.50 | 5.50 | 1.30 | Bal | 1.50 | 12.00 | 1.00 | 2.80 | W:4.50 | 20/300 | Centrifugal casting on cylinder ID surface |
Fe105W | 61 | 2.00 | 6.00 | 1.90 | Bal | 15.00 | 1.00 | 2.50 | W:4.50 | 20/300 | Centrifugal casting on cylinder ID surface | |
Fe105W-1 | 61 | 1.50 | 8.00 | 2.00 | Bal | 1.30 | 8.00 | 1.00 | 3.00 | 20/300 | Centrifugal casting on cylinder ID surface | |
Fe105W-JC | 60 | 1.50 | 8.00 | 2.00 | Bal | 8.00 | 1.00 | 3.00 | W:3.20 | 20/300 | Centrifugal casting on cylinder ID surface | |
FJ-6 | 57 | 0.20 | 13.50 | 1.50 | Bal | 2.50 | 1.10 | 150/300 | Centrifugal casting on cylinder ID surface | |||
FJ-19 | 60 | 2.90 | 30.00 | 2.00 | Bal | 3.00 | 5.00 | 2.30 | 100/270 | Centrifugal casting on cylinder ID surface | ||
FJ-20 | 64 | 5.00 | 25.00 | Bal | 1.50 | 100/270 | Centrifugal casting on cylinder ID surface |